The technology proof of the new method was financed by EIT Raw Materials.

With the new method you get representative samples and accurate analysis of the bench.

PDSA Sampler-Analyser in an IMA Sampling Van moves between drilled cones/piles. Samples can either be taken from the cones using the IMA Samples Belt and put directly to online analysis or they can be taken into buckets and poured into the PDSA Sample Hooper.

PDSA can analyse piles or cones fast and in a representative way. Almost all chips are analysed without splitting or sample handling and a bench can be completed during one shift.

This method is economical because it saves costs by requiring a minimum number of samples to be analysed in laboratory.

PDSA Sample Hooper


PDSA Sampler-Analyser


The method is also ecological, offering a sustainable future for the mining industry.

The PDSA Sampler analyser can be effectively used at Ore Waste contact to avoid dilution. This leads to less waste rock to mill, less energy consumption and less chemicals used. Ore waste border is more accurate, the explosives are charged with more precision so there is less ore loss.

In side rock area the PDSA can be used to separate acidic (sulfide) from clean waste to avoid acidic drainage into the nature.

The PDSA Sampler Analyser provides a semi automatic operation as it is placed in a van that can move between rows of drilled holes.

When IMA Sampler Belt is used, cuttings are shovelled onto the sampler belt, moving the chips into the PDSA Sample Hopper to be analysed. Samples (5kg bucket) can also be poured into the PDSA Sample Hopper.

With this new method samples from the different parts of the hole can be analysed separately, providing in the end either a sectional or an average analysis of the hole.

composition in holes.png

low ore waste.png

The hole id can be typed on the panel before analysis or its GPS coordinates can be used.

This method is fast, analysing piles in 2-3 minutes and 20-30 holes in an hour. The hole bench is finished in a shift or two while drilling continues and is finalised.